Purchasing Firearms/Ammunition from CDNN
All firearms must ship to a valid FFL licensed dealer
It is the customer's responsibility to be in compliance with all Federal, State and Local laws regarding the purchase and ownership of Firearms/Ammunition. CDNN follows all Federal, State and Local laws concerning the sale and transfer of all Firearms/Ammunition
For more details please view our policy page or contact our Customer Service department at 800-588-9500
HK VP9 9MM TACTICAL
Action: Semi-Automatic • Finish: Hostil Environment • Barrel Length: 4.7" Threaded 13.5x1LH • Sights: Luminescent Three Dot Sights • Magazine(s): 2 - 15 Round • Grips: Polymer with replaceable grip panels • Weight: 26.87 oz. • Overall Length: 7.95"
Threaded barrel “Tactical” models have been added to the Heckler & Koch VP series. Except for their threaded barrels, these variants are identical to standard VP series pistols; only their weights and lengths differ due to the longer and slightly heavier threaded barrel.
The threaded barrels are manufactured at HK’s Oberndorf factory in southwest Germany, using the legendary Heckler & Koch cold-hammer forging process. HK cold hammer forged barrels —made from proprietary cannon grade steel —are well known for their long service life. Similar HK barrels on P30 models have fired more than 90,000 rounds in endurance tests.
The polygonal bore profile, with no traditional lands-and-grooves rifling, contributes to longer service life as well as a slight increase in muzzle velocity. Threaded barrels on the VP Tactical models do not use an O-ring assisted lockup as found on other HK Tactical handgun models.
HK pioneered the first striker fired handguns, producing both the VP70 and P7 series, designs that impacted several models by HK competitors. But a superior trigger has eluded most striker fired pistol designs. The VP9 trigger surpasses those found on competitors. It has a short, light take-up with a solid, single action type break followed by a short positive reset.
The VP9 trigger has a consistent pre-travel pull with a positive wall/crisp break. Typically, striker fired guns have a pre-travel pull that increases in weight as you go through the trigger stroke. With the VP9, you have a less than noticeable pre-travel pull until the trigger reaches the engagement point of the fire control parts prior to trigger break.
The VP9 uses HK’s ergonomic handgun grip design that includes three changeable backstraps and six side panels— accommodating all hand sizes. Molded finger grooves in the front of the pistol’s grip also instinctively position an operator’s hand for optimal shooting. Only HK handguns have such a customized grip.
Although influenced by other HK models, the VP9 has all the hallmarks of the latest, state-of-the-art handgun. All controls are completely ambidextrous. Slide releases are present on both sides of the frame and the magazine release can be easily activated by left- or right-handed shooters.
A new feature is HK’s patented charging supports — simple components that are mounted on each side of the rear of the slide and provide better gripping leverage for racking the slide rearward. The charging supports speed reloading and make operating the VP9 easier for shooters with reduced hand strength. The VP pistols uses the proven P30 steel magazine; 15 and 10-round capacity available.
The VP9’s proprietary captive flat recoil spring helps reduce the recoil forces effecting the operator and the handgun, improving shooter control during rapid firing and prolonging component service life.
The VP9’s machined steel slide is protected from corrosion and wear by HK’s hostile environment finish and all metal components, including springs and pins have superior metallurgy.